ENCAD T-200 Instrukcja Użytkownika Pobierz pdf (Strona 2)

___________T-200+ Technical Summary_________

This document serves to cover the technological aspects of the ENCAD T-200+ printer and

answer any technical questions regarding printer setup/operations. Most CAD media may pass

through the printer up to .020” thick. Please refer to the Quick Start Guide (hard copy), online

Reference Guide and Maintenance Guide (on System CD) for specific operational questions.

These documents are provided with the printer on CD-ROM.

1. Key Features

- 36” width; accommodates 11” to 36” media

- Four-color (CMYK or KKKK) 600x600 DPI

printer

- 208-jet foam filled ink cartridges

- Four 50 ml snap-on ink reservoirs (caddy) for

extended ink operation

- Electronic Jet Compensation

- Rear media rollers (4” maximum roll diameter);

cut sheet basket

- Fast 4-K CAD printing speeds, up to 567 sfph /

52.7 smph (normal/4-pass mode: 100 sfph

/9.3 smph); fast full-color printing speeds,

(photo mode or normal/4-pass mode) @ 37 sfph/3.4 smph

- Emulation: HP-GL/2, HP RTL, EN RTL

- Process color sets of dye-based and pigmented (K only) inks available

- Line length accuracy: ± 0.2% of length or ± 0.015 in. (0.38 mm).

- SEH 100 Base-T Ethernet print server

- Full driver support: AutoCAD 2000, ADI, HDI, & Windows

2. Printer Cartridges & Snap-On Reservoirs

The printer uses four color (CMYK) or four black (KKKK), 208-jet foam filled cartridges with

ENCAD inks. The Black (K) ink will be pigmented

optimized for lines on bond and the color (CMY)

inks will be dye based (or CMYK dye

configuration. Dot sizes are true 600 x 600 color

DPI printing at various firing rates up to 8Khz

(RTL data appropriate for 300 or 600 dpi.). 3

different configurations are available:

4-K Pigment (Black CAD only)

CMY Dye + K Pigment (CAD + color)

CMYK Dye (color graphics only)

Four 50 ml snap-on ink reservoirs (caddy) are used for extended ink operation. To check ink

levels in the snap-on reservoirs just look through the clear walls. Replace when empty by simply

pushing onto the cartridge. The cartridge warranty is 165 ml;

cartridge shutoff is 350 ml with a “Cartridge End of Life”

message. Selection of draft (1/2 pass), normal (4 pass) and best

(6 pass) print modes are available from the printer control panel or

RIP. CMY cartridges are filled to ~35 ml of ink; K (pigmented)

cartridges are filled to ~35 ml of ink (~30 ml usable ink

respectively due to foam absorption).

1 2 3 4 5 6 7 ... 98 99

Komentarze do niniejszej Instrukcji

Brak uwag

ENCAD T-200 Instrukcja Użytkownika Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Papier do plotera ENCAD T-200